Phone 432-686-0397
BEGIN & END YOUR PUMPJACK
PURCHASING EXPERIENCE HERE
email: pumpjacks@aol.com
Send us your inquiry.
Service before and after the sale.
We recondition units for your use.
Proven and field tested: Lufkin, American, Bethlehem, Parkersburg, National, Emsco, Cabot, Alten, Rigmaster, Happy, Churchill, Salzgitter, Wuelfel, Vulcan, and more!
We offer reconditioned traditional name brands.
IRON HORSE BEARING CO.
(since 1979)
3/14/07 - JUST IN:
flush joint casing: 8,300' 4-1/2" 11.60#, J, rg 3, white & yellow band, FL4S thread
vessels available: 10 x 20 FWKO, and two 8 x 15 FWKOs
tank battery: 2 or 3 - 500 brl steel welded tanks, w/stair & walkway, 210 fibre glass open top water tank, 4 x 20 or 6 x 20 heater treater or 10 x 24 fibreglass gun barrel
Reconditioning Yard
Can Be Packaged
With Special Pricing
API UNITS
Double Reduction
and also
Single Reduction Units
Call 432-686-0397
To Negotiate A Buy
640s - one double reduction
456s - one air balance
320s - three double reduction, two single reduction
228s - two double reduction, six single reduction, one chain double reduction, two chain single reduction
160s - four double reduction, nine single reduction
114s - twelve double reduction, six single reduction, one chain single reduction
80s - one double reduction
57s - five double reduction
40s- two double reductionl
25s- two double reduction
16s - one double reduction
Keep on pumpin' till the oil flows,
Keep on pumpin' make your dollar grow,
You can pump more oil at a lower cost,
When you use a pumpjack like our "iron hoss."
Now our "iron hoss" ain't no choo choo train,
But it'll pump your oil in snow, sleet, heat, & rain,
So, give us a call, and give us a test,
And you'll find out why we're the best.
LISTED PRICES SUGGESTED ONLY
PACKAGE QUOTES CAN BE CHEAPER
WE WILL MAKE YOUR PROJECT RIGHT
|
Midland, TX 79702
ph: 432-686-0397
fax: 432-570-0397
email: pumpjacks@aol.com
For Sale:
Equipment for the Oilfield
mostly
pumpjacks, etc.
and some
vessels, seperators, pipe, rods, pumps, motors
- Like -
Vulcan D640-305-144
National D456-305-120
Parkersburg D320-256-120
Please inquire:
pumpjacks@aol.com
ph-432-686-0397
- How about -
RUNS SMOOTHER
LESS GEAR SLACK
PROVEN RELIABILITY
GREATER SAVINGS
HIGHER SERVICE FACTOR
Does this sound good to you?
Looking for a pumpjack bargain in the midst of rocketing equipment prices?
Read on below:
reconditioning yard.
both, Double reduction
AND SOME
Single reduction.
So, you are looking for a pumpjack bargain in the midst of rocketing equipment prices?
We have some Single Reduction Units priced economically, reconditioned and ready to pump just as much oil as a double reduction unit.
Single reduction can stand alone with gas engines or use a jackshaft reduction with electric motors.
Single reduction run smoother with less gear slack than double reduction.
Jackshaft v-belts dampen shock load to minimize effect of remaining gear slack.
9 times out of 10, single reduction units exhibit less gear wear than double reduction units.
Vintage Lufkin, American, Cabot, National, Emsco, Parkersburg, Bethlehem
offer more proven reliability than new foreign imports
and much greater savings than new domestic units
and usually a higher service factor design.
Please Email Inquiry
proprietor: George Dreher ph-432-686-0397
REBUILT AND IN STOCK
SMOOTH RUNNING, TOUGH, LONG LASTING SINGLE REDUCTION UNITS
SINGLE REDUCTION Specifications:
11/01/05, in yard. Single reduction Options: 228 & 320 jackshaft $1,800. 160 & 114 jack shaft $1,500. 228 & 320 concrete base $2,000. 160 & 114 base $1,500. Sucker rod crank guards $250. Belt guards made to order. Gas engines available.
Lufkin (320S with 100" stroke) TC OAL 54B, 382,000 in-lb peak torque, floor clearing, order #15299, Ser. # 15U, 9.4:1 gear ratio, 71 hp @ 20 SPM, S.P. TC.OAL, 24,750#, 14,950# ECB w/84" stroke, 6D 34" unit sheave, 42"-36"-30"-24"-18" crank hole radius, 78" crank arm swing, #1 weights, $34,500
Lufkin (320S with 100" stroke) TC 1A 54B, 382,000 in-lb peak torque, floor clearing, order #113862, Ser. # 18U, 9.4:1 gear ratio, 71 hp @ 20 SPM, 6C 36" QD unit sheave, 37"-32"-27"-22" crank hole radius, 72" crank arm swing, #1 weights, $32,500
Lufkin (228 with 100" stroke) TC 1A 54, 255,000 in-lb peak torque, non-floor clearing w/pipe riser, order #34123, ser. #67, 9.4:1 gear ratio, 51.7 hp @ 20 spm, 7D 34" unit sheave, 6-7/16" crank shaft, 37"-32"-27"-22" crank hole radius, 66" crank arm swing, 2-#1 & 2-#2A weights, $26,500 with pipe skid riser
Lufkin (228 with 86" stroke) TC 2A 36, 264,000 in-lb peak torque, non-floor clearing, order #86802, ser. #363U, 19,000" beam, 10,800# ECB w/#2 weights, plus has 2 aux wts, 6D 36" unit sheave, 18" brake hub, 32"-27"-22"-17"-12" crank hole radius, 60" crank arm swing, model O gas engine base 41"W x 18"H x 26'L - $18,500 w/concrete base
National 228 structure with 74" stroke, floor clearing, 24,000# beam rating, with Emsco SC228 gear box, serial #70, 10.05:1 gear ratio, 10C 34" unit sheave, OW 8 weights 32"-27"-22"-17"-12" crank hole radius, - $15,500
Emsco SC 228 with 74" stroke non-floor clearing, 24,200# beam rating, serial #40, 10.05:1 gear ratio, 5D 34" unit sheave, AH-26810-B weights 32" crank hole radius,- $14,500
Lufkin 160 with 74" stroke, floor clearing, SC-26-C, order #38579 - S.N. 32 U, 10.5:1 gear ratio, #2 weights, 32"- 27"-22" crank hole radius, 64" crank arm swing, 6D 30" unit sheave, 18" brake drum, 170,000 in-lb torque, 34.4 hp @ 20 spm - $14,500
Lufkin 160 with 74" stroke, floor clearing, SC-26-C, serial #______, 10.5:1 gear ratio, #2 weights 37" crank hole radius - $14,500
Lufkin C-160S-74RO-16.4-GBB, non-floor clearing, order #198337, ser. #3, 10.5:1 gear ratio, 3CRO weights, 24"-18"-12" crank hole radius (factory offset beam), 60" crank arm swing, concrete base 44"W x 14"H x 24'L, $14,500 w/concrete base
Lufkin 160 with 74" stroke, TC 3A 18B, 163,350 in-lb peak torque, order #63661, ser. #104U, 10.5:1, 33.0 hp @ 20 SPM, 4C 30" QD unit sheave, 32"-27"-22"-17" crank hole radius, 60" crank arm swing, 36"W x 24"H x 26'L model O base, - $14,500 with concrete base
National (228 with 74") stroke non-floor clearing, 21,000# beam rating, type H80T, serial #811, 9.4:1 gear ratio, 6" crank shaft, 7D 36" unit sheave, OR 27 weights, OR 24 crank, 32"-27"-22"-17" crank arm radius, 60" crank arm swing, model O gas engine base 40"W x 24"H x 26'L, - $15,500 w/ model O concrete base
National 228 with 74" stroke, non-floor clearing, S.P. D-21LN, 21,000# beam rating, type H80T, 9.4:1 gear ratio, 6" crank shaft, 7D 36" unit sheave, 3-OW 8 weights, 32"-27"-22"-17" crank arm radius, 60" crank arm swing, model O gas engine base 40"W x 24"H x 26'L, - $15,500 w/ model O concrete base
National 160S with 74" stroke, floor clearing, Ser. #17142, 9.73:1 gear ratio, 6" crank shaft, 10C 32" unit sheave, OR 27 weights, OR 24 cranks, 32"-27"-22"-17" crank hole radius, 60" crank arm swing,- $13,500b
Emsco SA-160 with 74" stroke, 21,200# beam rating, serial #269, 10.06:1 gear ratio, 6C 30" unit sheave, AH28763-1B weights, 27" crank hole radius, -$13,500
7 units in stock- Emsco SC 160 with 74" stroke, 21,200# beam rating, serial #452, #317, #589, #598, #414, #326, #323, 10.06:1 gear ratio, 6C 30" unit sheave, AH287632B weights, 32"-27"-22" crank hole radius, $12,500
National (114 with 64" stroke) H46TP, 124,000 in-lb peak torque, non-floor clearing, ser. #6408, 10.2:1 gear ratio, 7C 29" unit sheave, 27"-22"-17" crank hole radius, 54" crank arm swing, RN 36 crank, 30"W x 24"H x 20'L model O base, $10,500 w/concrete base
Bethlehem 160 leaf weight w/74" stroke, $11,000
Parkersburg 228 chain drive w/64" stroke, $12,500
OCS 228 chain drive w/64" stroke, $12,500
Emsco 114 w/64" stroke $9,500
American type 351 w/64" stroke, $9,500
Bethlehem 228 leaf weight w/74" stroke $12,500
CAN OFFER TURNKEY PACKAGES
RED HOT specials:
LUFKIN TC S-320 100" stroke
heavy structure
fully weighted
Lufkin S-228 86" and 100" stroke
heavy structure
fully weighted
Lufkin S-160 74" stroke
heavy structure
fully weighted
LUFKIN D-114 64" stroke
heavy structure
EMSCO 160 REFURBISHED, PICTURED 5/23/05
Units painted tan with orange tips (unless otherwise specified).
Can include gas engines and motors.
Can include delivery and setting.
Limited warranty.
FOB Midland, Texas.
Limited warranty for units operated within design limits of API Standard 11E and accepted industry standards.
CALL FOR CURRENT LISTING
AND TAILOR A DEAL TO FIT YOU
INVENTORY COMES AND GOES
80 units in Stock
Price is Negotiable based on
stroke, structure, ECB, model, etc:
Series 700 Rotoflex with 288" stroke- CALL
Series 600 Rotoflex with 288" stroke- CALL
912- CALL
Yard inventory,call for current listing
pumpjacks,etc., ph-432-686-0397, Midland, TX
reconditioned with limited warranty, optional base, belt guard, crank guard, delivery & setting, etc.
DOUBLE REDUCTION:
640's- Vulcan 640-305-144
456's- National 456-305-120, CALL
320's- TWO Parkersburg 320-256-120
Kreiter 320-305-100
228's-Alten 228-246-86
SMI 228-246-86
160's-14 days- American D160-173-74 with pipe skid
Parkersburg 160-173-74
National 160-173-74
7 days- Wuelfel 160-173-74
triple reduction Rigmaster factory beam skid 160-200-74
114's- 10 days- American 114-143-64, factory beam skid
10 days- American 114-143-64
10 days - Lufkin TC114-143-64
10 days- American 114-143-64 pipe skid
20 days- Emsco 114-143-64
20 days- Oilwell 114-143-64
10 days- American Smaco 114-143-64
10 days- Alten 114-143-64
30 days- Trico 114-143-64
30 days- Big M 114-143-64
Whitaker 114-143-64
80's- Cabot 80-119-54
57's- Bethlehem, National, Oilwell, Alten, Cabot, Parkersburg
40's- American, Cabot, Emsco, Bethlehem, National
25's- Lubbock, Liberty
16's- Lufkin
______________________________________________
jackshaft for single reduction additional
320's-single reduction units jackshaft available
READY-Lufkin TC-54B, 320 w/100" stroke, $36,500
10 days-Lufkin TC-54B, 320 w/100" stroke, $36,500
Parkersburg 320S-305-100
228's-single reduction units jackshaft available
Lufkin TC1A-54 on pipe skid, 228 w/100"stroke, $28,500
Lufkin TC-36, 228 w/86" sroke, $20,500
Emsco SC228, 228 w/74" stroke, $16,500
National 228 w/74" stroke, $17,500
OCS chain drive, 74" stroke, non-floor clearing, $14,500
Parkersburg chain reducer, 74" stroke, $14,500
160's-single reduction units jackshaft available
Bethlehem 160 74" stroke, leaf weight, $14,500
THREE- Emsco SC-160-212 w/64" stroke, $15,500
FOUR- Emsco SC-160 w/74" stroke, $15,500
Emsco SA-160 w/74" stroke, $15,500
National 160 w/74" stroke, $15,500
114's-single reduction units jackshaft available
American type 351, almost 160, 64" stroke, $10,500
Emsco 114 w/64" stroke, $10,500
Emsco 114 w/64" stroke, $10,500
TWO- National 114 w/64" stroke, non-floor clearing, $10,500
Rotoflex series 600 & 700 w/288" stroke - call
Engines & motors:
Call for AJAX
Lufkin 795 60 hp natural gas engine, rebuilt
Fairbanks Morse 739, rebuilt
Fairbanks Morse 503, rebuilt
125 horse power electric motor, field
60 horse power electric motor, field
30 horse power electric motor, field
TURNKEY DELIVERY & SETTING AVAILABLE
ON SALE AT FAT DISCOUNT OFF LIST
SURPLUS UNUSED ROLLER CHAIN
80H 3CP 108, 315 FEET, LIST $28.22/FT less discount
120H 3CP 78, 419 FEET, LIST $91.00/FT less discount
80H 3CP 128, 149 FEET, LIST $44.20/FT less discount
140H 3CP 78, 170 FEET, LIST $99.45/FT less discount
160H 3CP 108, 1057 FEET, LIST $70.66 less discount
160H 3CP 88, 1190 FEET, LIST $116.33/FT less discount
120H 3CP 100, 225 FEET, LIST $91.02/FT less discount
200H 3CP 70, 277 FEET, LIST $264.33/FT less discount
MISCELLANEOUS SPROCKETS
Vessels:
10’ x 20’ National F.W.K.O, rebuilt
8’ x 10’ National F.W.K.O., rebuilt
5’ x 15’ F.W.K.O., rebuilt
4’ x 20’ Heater Treater, rebuilt
6’ x 20’ Heater Treater, rebuilt
3’ x 15’ Heater treater, rebuilt
30” x 10’ Test metering separator, rebuilt
Tanks:
LACT (Lease Automatic Custody Transfer) Unit
to your specifications, ~Call
Additional Listings:
6,800’ 2-3/8” J-55 tubing,T&D
11,000 2-7/8” J-55 tubing, T&D
7,600’ 2-7/8” 8.70# DSS N-80 tubing, T&D
1”, 7/8”, ¾” hi-strength inspected sucker rods CALL
20- 1-1/4” K-bars
24’ x 2” x 6’ RHBC insert pump rebuilt
5-1/2” x 2-7/8” Baker Lockset Packer rebuilt
5-1/2” x 2-7/8” Tubing Anchor rebuilt
7” x 2-7/8” KV8 Packer rebuilt
6-5/8” x 2-7/8” KV8 Packer rebuilt
misc. gas meter runs,
PUMPJACK SERVICE
DELIVERY & SETTING
WELL SERVICE
SANDBLAST & COATING
For Best Equipment Deals
Call Now!!!
~RED HOT~ INTERNET Spectacular
>>> All serious offers will be considered.<<<
(see list below)
VESSELS
10' x 20' 3 phase Free Water Knockout
5' x 15' Free Water Knock Out
6' x 20' Heater Treater
4' x 20' Heater Treate
30" x 10' Test Metering Seperator
(see additional listing below)
PLUS
Sucker Rods
Tubing
Pumps
(contact us for info)
Reconditioned equipment is almost as good as new. so it is sensible to consider reconditioned oilfield equipment. We can offer an extended prorated warranty. Ask for details.
SERVICE BEFORE AND AFTER THE SALE
Unit Repair
Bearing & Gear box repair
Sandblasting & Coating
Fabrication
Delivery & Setting
CALL US TO RECONDITION YOUR EQUIPMENT
Give us your specifications and we will work with you to provide the right equipment for the job. Whether working with known conditions or with variables we can offer the euipment to meet the requirements. Guaranteed.
WE CAN DELIVER & SET EQUIPMENT WITH OUR FULLY EQUIPPED TRUCKS
Our predecessor, Iron Horse Bearing Co., started manufacturing new equipment of our own design, Iron Horse Pumping Units, in 1980, using proprietary bearing materials. This equipment is still working fine in the oilfield today. Even though ninety-nine times out of one hundred there is economical equipment available, if we don't have the right equipment for your application we can build it. Reducing production costs with state of the art technology will be essential in the coming years.
This is a partial listing of our oilfield equipment inventory.
All serious offers will be entertained, turnkey delivered and set.
Please inquire for items not listed.
EVERYTHING IS NEGOTIABLE
6' x 20' heater treater
4' x 20' heater treater
36" x 10' 3-phase test metering seperator
300 barrel steel tank
400 barrel steel tank
500 barrel steel tank
5' x 15' free water knockout
8' x 10' free water knockout
10' x 20' free water knockout
3/4" 7/8" 1" inspected sucker rods
miscellaneous tubing
all sizes electric motors and control panels
1-1/16" 1-1/4" 1-1/2" double valve insert pumps
Ajax/Fairbanks Morse/Lufkin gas engines
packers, tubing anchors
pumpjacks of all sizes, etc.
EQUIPMENT INVENTORY | LINKS | TRUCKING
P.O. Box 10746
Midland, TX 79702
ph: 432-686-0397
fax: 432-570-0397
email: pumpjacks@aol.com
|
Powered By OpenWorld
© Copyright 1999 OpenWorld All rights reserved. |
